Classic AutoAir Perfect Fit-Elite Series Instrukcje Operacyjne Pobierz pdf (Strona 17)

Attach the housing under the dash on the passenger side. Attach housing to the right of the glove

box door.

Insert louver assembly into housing.

Locate the center face distribution hose adaptor.

Attach adapter under center of instrument panel

using (2) #10 tek screws.

Locate Center Louver Bezel Assembly

and (2) #8 x 3/8” pan head screws.

Attach bezel assembly over hose adaptor

and fasten with (2) #8 screws. (2) on

bottom.

Locate in the hardware sack kit (1) single face outlet and

(2) #10 x ¾” tek screws.

Attach the housing under the dash on the drivers side.

Attach housing to the right of the parking brake release

handle.

Insert louver assembly into housing.

Locate (4) pieces of the 2” flex

duct from the unit box.

(1) 4ft, (1) 3ft cut the duct to 32”,

(1) 3ft, and (1) 2ft.

Attach the hoses as shown and

route to the dash louvers.

Reattach the fresh air door cable using original hardware.

#10 TEK SCREWS

DRIVERS CENTER LT. CENTER RT. PASSENGER

4FT 32” 3FT 2FT

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 30 31

Brak uwag

Classic AutoAir Perfect Fit-Elite Series Instrukcje Operacyjne Strona 17